how do i print 4 * 3 inch barcode from Z4M Plus Printer?

how do i print 4 * 3 inch barcode from Z4M Plus Printer?
Hi Need Your help because i am using Z4M Printer and want to print 4*3 Inches Barcode which is not printing properly
if i set Media Settings Media Tracking = Continuous it will shift down barcode after 5-6 printings

please help me to resolve this issue

Best answer:

Setting the Media Tracking to “Continuous” tells the printer that the labels you have loaded are one long continuous label with no breaks/gaps in between and your prints will slowly move out of position on non-continuous lable stock. It is a little misleading if you’re not familiar with thermal printer terminology. If you have gaps in between your labels you need to set your Media Tracking to “Non-Continuous”, this will let the printer track the alignment of the labels from one to the next using the gaps in between. Make sure your sensor type is set to “Gap” and run a calibration to set the sensors to the proper settings so the printer will properly detect the labels and the gaps, this will keep your barcodes from moving out of alignment on the labels.

Hope that answers it for you. If you have other questions, contact me and I can see what I can do.

Tags: Barcode, from, inch, Plus, print, printer

Under Forum