how do i set up a wireless network with a hp psc 1300 series printer/scanner/copier?

how do i set up a wireless network with a hp psc 1300 series printer/scanner/copier?

Best answer:

Choose one of the options below to connect the all-in-one to either a wired or a wireless network.
NOTE: If you want to have both a USB and Network Connection at the same time, skip steps 1 and 2. When the installation is complete the newly installed (network) print driver will be the default.
Changing a USB connection to a wireless connection

1.
Delete the USB-connected printer from the computer.
1.
Click Start .
2.
Click Settings .
3.
Click Control Panel .
4.
Double-click Printers and Faxes .
5.
Right-click on the printer that is connected using the USB connection and then click Delete .
2.
Disconnect the USB cable from the back of the all-in-one.
3.
Press the Setup button on the control panel. The Setup Menu displays.
4.
Press the down arrow button to select Network and then press OK . The Network Menu displays.
5.
Press the arrow buttons to select Wireless Setup Wizard and then press OK . The Wireless Setup Wizard displays.
6.
Follow the instructions that display on the screen.
7.
Insert the product CD into the CD-ROM drive on the computer. The startup screen displays automatically.
If the startup screen does not display automatically, use the following steps to start the installation manually:
1.
Click Start .
2.
Click Run . The Run dialog box displays.
3.
In the Open: text box, type D:\setup.exe , where D is the letter of the CD-ROM drive, and then click OK .
8.
Select Add a Device and then click Next .
9.
Follow the instructions that display on the screen.
10.
When prompted for the connection type, select Through the network and then click Next .
11.
Select Wireless and then click Next .
12.
Follow the instructions that display on the screen to complete the software installation.

Changing a USB connection to a wired (Ethernet) connection

1.
Delete the USB-connected printer from the computer.
1.
Click Start .
2.
Click Settings .
3.
Click Control Panel .
4.
Double-click Printers and Faxes .
5.
Right-click on the printer that is connected using the USB connection and then click Delete .
2.
Disconnect the USB cable from the back of the all-in-one.
3.
Connect one end of an Ethernet cable to the Ethernet port on the all-in-one.
4.
Connect the other end of the Ethernet cable to an available port on the router, switch, or access point.
5.
Insert the product CD into the CD-ROM drive on the computer. The startup screen displays automatically.
If the startup screen does not display automatically, use the following steps to start the installation manually:
1.
Click Start .
2.
Click Run . The Run dialog box displays.
3.
In the Open: text box, type D:\setup.exe , where D is the letter of the CD-ROM drive, and then click OK .
6.
Select Add a Device and then click Next .
7.
Follow the instructions that display on the screen.
8.
When prompted for the connection type, select Through the network and then click Next .
9.
Select Wired and then click Next .
10.
Follow the instructions that display on the screen to complete the software installation.

Tags: 1300, network, printer/scanner/copier, series, wireless

Under Forum